 |
|
 |
Performance SpecificationsWall ArcosThese performance specifications are written for use in plans and bid documents. They are intended for reproduction as precise descriptions of technical specifications for Litecontrol products. The luminaire housing shall be one-piece .100" thick extruded aluminum, attached to an 18-gauge steel back plate. End caps shall be 14-gauge steel with no holes or knockouts. The fixture shall be 7 1/2" wide by 3 1/4" high; the shape shall be a 9" partial radius. The fixture shall be available in lengths up to 12 feet using only two mounting brackets. The reflector shall be die-formed steel with high reflectance white finish, with areas of .025" thick specular aluminum. A luminance control deflector shall provide uniform light distribution and diminish the appearance of socket shadows. Fixtures shall be available with one- or two-lamp T8, one-lamp compact fluorescent, or one-lamp T5HO. The one-lamp T8 fixture shall be 80% efficient, with a maximum candela intensity at 121° above nadir in the 90° plane. The two-lamp T8 fixture shall be 70% efficient, with a maximum intensity at 140° above nadir in the 90° plane. The two-lamp compact fluorescent fixture shall be 79% efficient, with a maximum intensity at 130° in the 90° plane. The one-lamp T5HO fixture shall be 91.4% efficient, with a maximum candela intensity at 125° above nadir in the 90° plane. Fixture and electrical components shall be UL and/or CUL Listed and shall bear the I.B.E.W., A.F. of L. label. Note: Litecontrol reserves the right to change specifications without notice for product development and improvement. |
click number for product page