 |
|
 |
Performance SpecificationsClassica ADA SconceThese performance specifications are written for use in plans and bid documents. They are intended for reproduction as precise descriptions of technical specifications for Litecontrol products. Overall dimensions of the luminaire, after mounting to the wall shall be 13.19" wide by 9" high by 3.88" deep. It shall meet ADA specifications for required spaces. The luminaire housing shall consist of two parts. The base shall be a 9" radial die-cast aluminum, stepped down to a partial 8" radius. Its upper fascia shall be 9" radial die-formed .032" perforated aluminum. The perforations shall be .045" diameter holes .088" OC, 172 holes per inch, 24% open, framed on three sides. White acrylic diffusing panel shall be retained behind perforated fascia. The fixture shall provide diffuse illumination for the perforated area, while providing indirect illumination on the wall. The back mounting plate of the fixture shall measure 5" wide by 7.63" high, for mounting to a 2" by 3" outlet box positioned horizontally. The fixture shall be provided with two lampholders for vertically mounted 18- or 26-watt quad, 4-pin electronic compact fluorescent lamps. When operating with two 18-watt lamps, 77% of the lumen output shall be uplight, 23% shall be downlight. Fixture and electrical components shall be UL and/or CUL Listed and shall bear the I.B.E.W., A.F. of L. label. Note: Litecontrol reserves the right to change specifications without notice for product development and improvement. |
click number for product page