 |
|
 |
Performance SpecificationsWall Classica / Classica 2' SconceThese performance specifications are written for use in plans and bid documents. They are intended for reproduction as precise descriptions of technical specifications for Litecontrol products. Wall Classica The luminaire housing shall consist of two pieces. The bottom section shall be extruded aluminum and the sides shall be perforated, 20-gauge, die-formed steel with .062" diameter staggered holes on .125" centers, 74 holes per square inch, 23% open, with solid framing on all four sides. End caps shall be 14-gauge steel with no holes or knockouts. A die-cast sculptured end cap shall also be available. The fixture shall be 7 1/2" wide and 3 1/4" high; the shape shall be a partial 9" radius. Lamp chambers shall be 3- or 4-foot lengths. A 9" radial by 2" long, die-cast aluminum, intermediate connector with an 8 3/8" offset radius shall join each lamp chamber. The reflector shall be high-reflectance white steel for asymmetric indirect light distribution, with rows of .250" wide slots, to provide diffuse illumination for the perforated area. The maximum luminance on the perforated area shall not exceed 50 footlamberts from any angle. The fixture shall be 78.3% efficient with one T8 lamp and 69.4% with two T8 lamps. The fixture shall have a minimum of 95% uplight and a maximum of 5% downlight. The fixture shall be available in one- or two-lamp T8. Fixture and electrical components shall be UL and/or CUL Listed and shall bear the I.B.E.W., A.F. of L. label. Classica 2'Sconce The fixture housing shall consist of two pieces. The bottom section shall be extruded aluminum and the sides shall be perforated, die-formed steel with .0625" diameter holes staggered .125" OC, 74 holes per square inch, 23% open, with solid framing on all four sides. End caps shall be 14-gauge steel with no holes or knockouts. A die-cast sculptured end cap shall also be available. The fixture shall be 7 1/2" wide and 3 1/4" high; the shape shall be a partial 9" radius. Lamp chambers shall be 2-foot lengths. The reflector shall be high-reflectance white steel for asymmetric indirect light distribution, with rows of .250" slots, to provide diffuse illumination for the perforated area. The maximum luminance on the perforated area shall not exceed 50 footlamberts from any angle. The fixture shall be highly efficient, with a minimum of 95% uplight and a maximum of 5% downlight. The fixture shall be available in one- or two-lamp T8 and one-lamp compact fluorescent. The fixture shall be 78.3% efficient with one T8 lamp, 69.4% efficient with two T8 lamps, and 80% efficient with one 40-watt compact fluorescent. Fixture and electrical components shall be UL and/or CUL Listed and shall bear the I.B.E.W., A.F. of L. label. Note: Litecontrol reserves the right to change specifications without notice for product development and improvement. |
click number for product page