 |
|
 |
Performance SpecificationsV3 wall valanceThese performance specifications are written for use in plans and bid documents. They are intended for reproduction as precise descriptions of the technical specifications for Litecontrol products. The housing shall be die-formed 20-gauge steel. The front fascia shall be die-formed 22-gauge steel, either solid or have a framed perforated window. The perforated window shall have 0.046" diameter holes on 0.140" centers, and shall be 10% open. A white acrylic diffusing panel shall be retained behind the perforated fascia. The front fascia assembly shall lock to the housing in one of three different positions. The reflector shall be die-formed, high reflectance aluminum. The fixture shall have a cross section with one T5, T5HO (high output), or T8 lamp. The fixture housing shall include rubber standoffs at its back, and shall be installed to the wall directly with mounting screws. Fixtures may be mounted in continuous rows with one connecting fastener at each joint and one snap-on spline cover on each seam. End caps shall be 14-gauge steel and mount to fascia end headers. The one-lamp luminaire with perforated front fascia in the indirect lighting position using a T5HO lamp (W-AI-3414T5HO-PFF) and the same luminaire using a T8 lamp (W-AI-3414T8-PFF) shall have efficiencies of 67.8% and 59.8% respectively as tested in certified Litecontrol tests. Fixture and electrical components shall be UL and/or CUL Listed and shall bear the I.B.E.W., A.F. of L. label. Note: Litecontrol reserves the right to change specifications without notice for product development and improvement. |
click number for product page