 |
|
 |
Performance SpecificationsMantra jrThese performance specifications are written for use in plans and bid documents. They are intended for reproduction as precise descriptions of the technical specifications for Litecontrol products. The luminaire shall be an indirect, or indirect/direct circular fixture. Bottom housing of indirect/direct fixture shall be 23" in diameter, 3 3/8" deep, with a tapered profile, 20-gauge spun steel, and with a 9 3/4" diameter opening in the middle. Bottom housing of indirect fixture shall be 23" in diameter, 20-gauge spun steel, with a 9 7/8" diameter, 3 /4" deep concave center section at housing bottom. Recessed chassis shall be 20-gauge spun steel. The up-light component shall accommodate four 26-, 32-, or 42-watt triple-tube compact fluorescent lamps. The reflector shall be die-formed, .025" thick, specular hammertone aluminum. An optional down-light component in the 9 3/4" diameter opening using one 21-watt 2D lamp shall be available, with a 16 7/8" diameter, 2 1/16" deep white acrylic bowl as down-light diffuser. The indirect fixture shall be 68% efficient with four 42-watt compact fluorescent lamps. The indirect/direct fixture shall be 65% efficient with four 42-watt compact fluorescent lamps as up-light and one 21-watt 2D lamp as down-light, shielded by a 16 7/8" diameter, 2 1/16" deep white acrylic bowl. Fixture and electrical components shall be UL and/or CUL Listed and shall bear the I.B.E.W., A.F. of L. label. Note: Litecontrol reserves the right to change specifications without notice for product development and improvement. |
click number for product page