 |
|
 |
Performance SpecificationsScion jrThese performance specifications are written for use in plans and bid documents. They are intended for reproduction as precise descriptions of the technical specifications for Litecontrol products. The luminaire shall be an indirect, or indirect/direct circular fixture. Bottom housing of indirect/direct fixture shall be 24 3/16" in diameter, 16-gauge spun steel, with four rows of perforations (1/8" diameter holes) at housing periphery, and a 9 3/4" diameter opening in the middle. Bottom housing of indirect fixture shall be 24 3/16" in diameter, 3 3/8" deep, 16-gauge spun steel, with four rows of perforations (1/8" diameter holes) at housing periphery. Recessed upper housing shall be 20-gauge spun steel. The up-light component shall accommodate four 26-, 32-, or 42-watt triple-tube compact fluorescent lamps. The reflector shall be die-formed, .025" thick, specular hammertone aluminum. An optional down-light component in the 9 3/4" diameter opening using one 21-watt 2D lamp shall be available, with a choice of two diffusers. The diffuser options shall be either a flat, 1/8" white acrylic diffuser supported by a decorative suspended ring, 1/8" thick, 14" outside diameter, 10 3/4" inside diameter or a perforated bowl, 20-gauge spun steel, 1 3/16" deep, 5/64" staggered holes, 36% open, backed by an acrylic diffusing sheet and supported by the same suspended ring. The indirect fixture shall be 68.1% efficient with four 42-watt compact fluorescent lamps. The indirect/direct fixture shall be 65.3% efficient with four 42-watt compact fluorescent lamps as up-light and one 21-watt 2D lamp as down-light, shielded by a 1/8" thick flat acrylic diffuser; or 62.9% efficient with four 42-watt compact fluorescent lamps as up-light and one 21-watt 2D lamp as down-light, and with perforated spun-steel bowl, backed by an acrylic diffusing sheet as the down-light diffuser. Fixture and electrical components shall be UL and/or CUL Listed and shall bear the I.B.E.W., A.F. of L. label. Note: Litecontrol reserves the right to change specifications without notice for product development and improvement. |
click number for product page